• About Tuskin
• Tuskin News
• Case Studies
• Innovation
• Warranty
• Contact Tuskin

Liquid Metering Pumps & Systems

• Home
• Products
• Liquid Metering Pumps & Systems

Shown with 050 Series 3-roller pump head

TC-101  |  TC-200

TC-101 Liquid Metering Pump

The Tuskin TC-101 Liquid Metering Control has proven itself to be reliable and user-friendly. Constructed of sturdy anodized brushed aluminum with a tough touch pad control, this unit is simple to set-up and easy to clean. This unit is designed for many years of problem free operation. The TC-101 Control accommodates many pumping configurations.  Choose one of the listed options or contact us today with your unique requirements.

Specifications:

• Maintains accuracy to 0.5 g
• 2 to 60 RPM range
• Power cord (120 or 220 VAC, 50/60 Hz).  Factory Preset at 120 VAC can be changed to 220 VAC via internal selector switch on control.
• Signal cord (12-120 VDC/VAC), optically isolated.
• Can be ordered to operate in 0-10 volt Extrusion applications
• 5 digit 1/2 inch high numeric, red LED display illuminates Count/RPM/%.
• Memory capacity to retain set-up through power cycles.
• Built in calibration function for metering, continuous and proportional modes of operation.
• Transient protection and filtering on-line input.
• Operating temperature: 0 to 140ºF.

TC-101 Control with 3-roller Pump Head (050)

The 050 series 3-roller peristaltic pump head can be used in a wide range of applications.  It is rugged, designed to resist heat, chemicals and is impact resistant.  The quick release cover design makes tubing changes fast and clean.  The 050 pump head uses industry standard peristaltic pump tubing.

TC-101 Control with Large Volume Pump Head

The L60 Series 3-roller peristaltic pump head is perfect when large volumes are required. This pump head is rugged, designed to resist heat, chemicals, and is impact resistant.  The quick release cover design makes tubing changes fast and clean. The L60 pump head uses industry standard peristaltic pump tubing.

TC-101 Control with Easy Load Pump Head 

The Easy Load peristaltic pump head has a clam shell design that does not require threading the tubing through the rollers. The 3-roller model can be used in most applications. For low let down ratio and small shot size applications a 6-roller model is also available. The Easy Load peristaltic pump head uses industry standard peristaltic pump tubing.

TC-101 Control for Progressive Cavity Pumps 

The TC-101 control with the mounting bracket, stabilizer plate and motor coupling needed to mount a Horizontal Progressive Cavity pump head such as the ADD*FLO series “H” style.  Standard clockwise rotation.  The mounting kit can also be purchased separately to retrofit an existing pump.

TC-101 Control with RS Mount (P1031-RS)

The TC-101 control with the RS mounting bracket, gear coupler & stabilizer plate.  This configuration can be used with either the easy load pump head, as is, or with the HP style Progressive Cavity pump head by adding an HP bracket (10005HP).

P1031-RMD for Drum Pumps

TC-101 Control with Remote Motor Configuration

The motor is housed separately from the TC-101 control allowing the control to be placed up to 10 feet from the pumping system. This is especially convenient when pumping from large containers. Can be ordered in configurations for drum/tote pumps or horizontal mount progressive cavity pumps.

P1031-RMH for Horizontal Pumps

Resources

• Metering Calculator
• TC-101-Manual